Transverse shearing machine is a kind of equipment for cutting coil, common problems and solutions are as follows:

1. Uneven cutting: the blade may be worn or installed incorrectly, and the blade needs to be replaced or adjusted.

2, poor cutting: the blade may be too blunt or too worn, need to replace the blade.

3, the coil skew: may be uneven tension or inaccurate cutting, need to adjust the tension and position of the cutting machine.

4, cutting noise: the blade may be worn or loose, need to replace or tighten the blade.

5, slow cutting speed: may be insufficient tension or the blade is too blunt, need to increase the tension or replace the blade.

6. Stuck when cutting: the blade may be too dull or too worn, and the blade needs to be replaced.

7, cutting machine failure: may be circuit failure or mechanical parts damage, need to check and repair.

In short, for the common problems of the transverse shear machine, it is necessary to analyze and solve according to the specific situation, maintain the normal operation of the equipment and improve the work efficiency.